What a proper assessment needs
Before this topic can be assessed for a real installation, the person responsible for the design or verification needs to establish the relevant facts:
- Individual load ratings and operating patterns
- Premises type and occupancy
- Heating, cooking, charging and other sustained loads
- Existing demand measurements where available
- Documented basis for each diversity assumption
Factors to consider
A percentage applied to the total connected load can obscure a large continuous load. The same equipment used in a home and in a commercial kitchen can have very different demand patterns. Connected load, diversified demand and supply capacity are separate quantities.
Keep the evidence with the decision
Record the equipment, installation conditions and the source of the data used. Where a manufacturer supplies product-specific instructions or coordination data, the exact product matters. A generic example should not silently replace that information.
For UK installation work, use the applicable edition of BS 7671 together with relevant guidance and manufacturer instructions. The IET’s publication hub is the starting point for current editions and supporting material. This brief does not reproduce the standard or establish compliance with it.
IET · BS 7671 and supporting guidance ↗Related calculations
Our arithmetic tools show their scope, inputs and formulas explicitly. They can help you understand a relationship between quantities. They cannot replace the installation assessment described above.