What a proper assessment needs
Before this topic can be assessed for a real installation, the person responsible for the design or verification needs to establish the relevant facts:
- Actual lengths of both conductor paths
- Conductor materials and cross-sectional areas
- Resistance data and its reference temperature
- Joint resistance and test lead compensation
- Circuit topology and parallel paths during testing
Factors to consider
The protective conductor can have a different cross-sectional area from the line conductor. A prediction based on identical conductors can therefore be misleading. Measured resistance is also affected by temperature and by any parallel paths present during the test.
Keep the evidence with the decision
Record the equipment, installation conditions and the source of the data used. Where a manufacturer supplies product-specific instructions or coordination data, the exact product matters. A generic example should not silently replace that information.
For UK installation work, use the applicable edition of BS 7671 together with relevant guidance and manufacturer instructions. The IET’s publication hub is the starting point for current editions and supporting material. This brief does not reproduce the standard or establish compliance with it.
IET · BS 7671 and supporting guidance ↗Related calculations
Our arithmetic tools show their scope, inputs and formulas explicitly. They can help you understand a relationship between quantities. They cannot replace the installation assessment described above.